Skip to content

Setup free SSL certificate for MiaRec using Let's Encrypt (Ubuntu 14.04)

This tutorial describes how to setup a free TLS/SSL certificate from Let's Encrypt on MiaRec server based on Ubuntu 14.04 server running Apache as a web server.

SSL certificates are used within web servers to encrypt the traffic between the server and client, providing extra security for users accessing your application. Let’s Encrypt provides an easy way to obtain and install trusted certificates for free.

What is Let's Encrypt? Let’s Encrypt is a free, automated, and open certificate authority managed by the non-profit Internet Security Research Group (ISRG). Major sponsors are the Electronic Frontier Foundation (EFF), the Mozilla Foundation, OVH, Akamai, Google and Cisco Systems. See this page for more on ISRG sponsors.

Step 1 - Install Certbot on Ubuntu 14.04

What is Certbot? Certbot is an easy-to-use automatic client that fetches and deploys SSL/TLS certificates for webserver. Certbot was developed by EFF and others as a client for Let’s Encrypt. This client runs on Unix-based operating systems.

To install Certbot, you must first enable the PPA repository maintained by the Certbot team:

sudo apt-get update
sudo apt-get install software-properties-common
sudo add-apt-repository ppa:certbot/certbot

Afterwards, update the package list to pick up the new repository's package information:

sudo apt-get update

And finally, install Certbot from the new repository with apt-get:

sudo apt-get install python-certbot-apache

Step 2 - Configure Apache to serve .well-known/acme-challenge directory

The Apache web server should be configured properly to allow serving of the files inside the /.well-known/acme-challenge directory. In this tutorial, we will use directory /var/www/html/.well-known as a location for the Certbot's temporary files.

What is a purpose of .well-known directory?

To obtain SSL certificate, the Certbot client creates a temporary file in ${webroot-path}/.well-known/acme-challenge directory. Then the Let’s Encrypt validation server makes HTTP requests to validate that the DNS for each requested domain resolves to the server running certbot. An example request made to your web server would look like: - - [05/Jan/2016:20:11:24 -0500] "GET /.well-known/acme-challenge/HGr8U1IeTW4kY_Z6UIyaakzOkyQgPr_7ArlLgtZE8SX HTTP/1.1" 200 87 "-" "Mozilla/5.0 (compatible; Let's Encrypt validation server; +"

Create file /etc/apache2/sites-available/letsencrypt-well-known.conf:

vim /etc/apache2/sites-available/letsencrypt-well-known.conf

Copy-paste the following content to that file:

For Apache 2.4:

<IfModule mod_proxy.c>
  ProxyPass /.well-known !

Alias /.well-known/ "/var/www/html/.well-known/"

<Directory "/var/www/html/.well-known">
  Options None
  AllowOverride None
  Require all granted

<Location /.well-known/acme-challenge>
  Options None
  Require all granted

Enable this configuration file:

sudo a2ensite letsencrypt-well-known.conf

Reload Apache:

sudo service apache2 reload

Step 3 - Obtain SSL certificates from Let's Encrypt server

Run the following command to obtain the certificate:

sudo certbot certonly --webroot -w /var/www/html/ -d

Important! Replace with your MiaRec server DNS name.

If everything goes well, then you should see the following message:

 - Congratulations! Your certificate and chain have been saved at:
   Your key file has been saved at:
   Your cert will expire on 2017-12-26. To obtain a new or tweaked
   version of this certificate in the future, simply run certbot
   again. To non-interactively renew *all* of your certificates, run
   "certbot renew"

Note the location of the generated certificate files. In our example, it is /etc/letsencrypt/live/

Step 4 - Install mod_ssl module for Apache

The mod_ssl module is available in apache2-common package. Execute the following command at a terminal prompt to enable the mod_ssl module:

sudo a2enmod ssl

Enable HTTPS for Apache:

sudo a2ensite default-ssl

Step 5 - Configure Apache to use new SSL certificates

Edit file /etc/apache2/sites-available/default-ssl.conf

vim /etc/apache2/sites-available/default-ssl.conf

Modify the parameters SSLCertificateFile, SSLCertificateKeyFile and SSLCertificateChainFile. They should point to the public, private and CA certificate files correspondingly.

Example of configuration (replace with your domain):

#   Server Public Key:
SSLCertificateFile /etc/letsencrypt/live/

#   Server Private Key:
SSLCertificateKeyFile /etc/letsencrypt/live/

#   Server Certificate Chain:
SSLCertificateChainFile /etc/letsencrypt/live/

Enable this configuration file and load Apache:

sudo a2ensite default-ssl.conf
sudo service apache2 reload

Step 6 - Open port 443 on firewall

If you are using iptables on this machine, then execute the following commands:

iptables -I INPUT 5 -i eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT

Save all rules into iptables configuration file:

service iptables save

Restart iptables service:

service iptables restart

If you are using ufw firewall, then execute the following commands:

sudo ufw allow https

Create file /etc/apache2/sites-available/miarec-ssl.conf:

vim /etc/apache2/sites-available/miarec-ssl.conf

Copy/paste the following content into this file:

<VirtualHost *:80>
    RewriteEngine on
    RewriteCond %{HTTP_HOST}%{REQUEST_URI} !^
    RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R=301,L]

Enable this configuration file and load Apache:

sudo a2ensite miarec-ssl.conf
sudo service apache2 reload

What is "" in the rewrite rule? MiaRec uses internally the HTTP protocol for sending call event notifications from recorder engine to a web portal. The above rewrite rule will force HTTPS for all web traffic except internal communication between recorder and web portal.

Step 8 - Configure cron to automatically renew the certificate.

Let’s Encrypt CA issues short-lived certificates (90 days). This tutorial shows how to automatically renew the certificates using cron.

Edit file /etc/crontab:

vi /etc/crontab

Insert the following line to the end of file:

27 5,21 * * * root certbot renew --quiet --no-self-upgrade --post-hook "apachectl graceful"

The example above will run the renew sub-command at 05:27 and 21:27 daily. You can change time to other values. If the certificates are updated, then apache is gracefully restarted.

Reload cron service:

service cron reload

Verify if cron service is started:

service cron status

It should return something like:

cron start/running, process 1105