Skip to content

07. Configure UCID

UCID needs to be enabled for Signaling Rules that are defined for Session Manager and MiaRec. Navigate to Domain Policies -> Signaling Rules. Select the policy for Session Manager and select the UCID tab. Click Edit, select the Enabled check box and type in a unique value in Node ID field. Click Finish to save configuration.

Perform similar steps for the MiaRec signaling rule.

Info

  • UCID will need to be enabled on the Signaling rule for MiaRec and the one for SM.
  • Node ID should be unique on the SBC and across the solution.
  • Protocol Discriminator should match what is on CM configuration. This is typically 0x00 as that is the recommended value.

Configure UCID