Cisco TAPI - Configuration
In MiaRec web UI, navigate to Administration -> System -> Recording Interfaces. In the Supplementary Interfaces section, click Configure next to Cisco TAPI.
Make sure Enable Cisco TAPI interface is enabled.

Verify TAPI connection

In the Recording Interfaces window, click Status next to Cisco TAPI.
In the Cisco TAPI recording status window, click the View Cisco TAPI devices link:
In the Cisco TAPI monitored devices window, you should see your Cisco devices that are being monitored by MiaRec application. A recording announcement works only for devices that are monitored by MiaRec!
If you do not see your devices in a list, then check the following:
Export as PDF
Copy link